Mercury Analyzer








HOME   |   PRODUCTS  |  SERVICES   |   ABOUT US   |   CONTACTS

Application Define Co., Ltd. All rights reserved.
Application Define  Co.,Ltd.                                    
49/30 moo. 11 Ratchaphruek Rd., Bangprom , Talingchan Bangkok 10170 Thailand                               
Tel : (66) 2864-7137,2 864 7138  Fax: (66) 2864-7139   Email: thunraphol@apdefine.co.th

      Spare parts & Consumable


      Software


      Other Analytical Instrument        

Mercury Analysis
QuickTrace M-8000 CVAA Mercury Analyzer The QuickTrace® M-8000 Cold Vapor Atomic Fluorescence (CVAF) Mercury Analyzer is ideal for ultra-trace to sub-mg/L mercury quantitation. It easily achieves the ultra-trace mercury detection limit of < 0.05 ng/L demanded by customers employing EPA method 1631. The QuickTrace® M-8000 is also versatile enough to analyze samples > 400 µg/L in a research or industrial setting without dilution.


QuickTrace® M-8000 CVAA Mercury Analyzer
The QuickTrace® M-8000 Cold Vapor Atomic Fluorescence mercury analyzer is ideal for ultra-trace to sub-mg/L mercury quantitation. This analyzer easily achieves the ultra-trace mercury detection limit of < 0.05 ng/L demanded by customers employing EPA method 1631. The QuickTrace® M-8000 is also versatile enough to analyze samples > 400 µg/L without dilution.

Depending on your laboratory's requirements, the QuickTrace® M-8000 mercury analyzer supports three modes of operation:

Mode 1: Cold Vapor Atomic Fluorescence Spectroscopy (CVAFS)

Mode 2: Cold Vapor Atomic Fluorescence Spectroscopy Single Gold Trap Amalgamation (CVAFS-SGTA)

Mode 3: Cold Vapor Atomic Fluorescence Spectroscopy Double Gold Trap Amalgamation (CVAFS-DGTA)

The mode can be changed in software, without hardware or tubing configuration changes.

Why is it so important to have a system that switches between ultra-trace analysis and low mg/L analysis with only the opening of a new method? These innovative features save you set up time and eliminate costly mistakes.

Teledyne Leeman Labs also employs cost saving features during the gold trap desorption such as shutting down the flowing rinse and slowing the SnCl2 flow. These innovative features can save the laboratory thousands of dollars per year by reducing reagent and waste costs.

Using the proven cold vapor atomic fluorescence (CVAF) technique combined with multi-tasking Windows® based QuickTrace® software package, the QuickTrace® M-8000 is one of the most stable reliable fluorescence analyzer available today.

For ultra-trace analysis we recommend our autosampler enclosure (ENC-500) to protect the samples from determinate errors such as dust particles. The ENC-500 will also protect your investment from the harsh acid gases normally present in and around digested samples.

Performance
Excellent short and long term stability are found in the QuickTrace® M-8000 CVAF analyzer. Less than 0.02 ng/L instrument detection limits are typical for the QuickTrace® M-8000 gold trap modes utilizing less than 25 ml of sample. We consistently achieve non-gold trap instrument detection limits of less than 0.1 ng/L utilizing less than 10 ml of sample.
Ultra-trace detection limits (< 0.05 ng/L IDL)
Linearity greater than 4 orders of magnitude
Dynamic range < 0.05 ng/L to > 400 µg/L
In Mode 1 by response comparison to a 100 ng/L standard, the system exhibits < 0.01% memory effect of a 1 mg/L standard immediately following the ingestion of a 1 part per million (mg/L) sample.
In Mode 1 without employing our smart rinse technology the system is ready to accurately measure a sample within four minutes following the ingestion of a 1 ppm sample
Mode 2 & 3 - Short term precision (%RSD @ 95% Confidence) = 2.5% @ 5 ng/L, n=5

Key Features
U.S. EPA 1631 and U.S. EPA 245.7 compliant
European standard EN-13506 and EN-12338 compatible
Full computer control of instrument parameters
Patented non-foaming gas liquid separator (GLS)
Reagent saving gold trap stand-by routine
GLS overflow protection
Detector saturation prevention combined with "Smart Rinse" - prevents carry over for high concentration samples
Ozone free low vapor pressure mercury excitation lamp
Smart rack technology
Filtered photo multiplier tube (PMT) detection system
Maintenance free Nafion® dryer
Universal power supplies
Analyze samples with or without assistance of an autosampler
Optional autosamplers (Manual - no autosampler, ASX-260, ASX-520) autosamplers combined with powerful customizable software can process up to 10 standard/QC solutions and 84-50 ml sample/QC solutions in a single unattended run. We do not limit the number of QC samples or positions
Automatic end of run standby routines
Powder coated metal construction
12 roller 4 channel peristaltic pump
Sample volume 0.5 ml to > 50 ml
High capacity mode of < 60 seconds per sample
Intuitive QuickTrace® software with built-in calibration, report generation and quality control features designed to make EPA compliance simple

QuickTrace™ M-8000 Mercury Analyzer Specifications
Argon carrier gas:                             variable psi not to exceed 50 psi
Power Requirements:                       100-240 VAC +/- 10%, 50/60 Hz
Dimensions (H x W x D):                  20 x 48 x 60 cm
Weight:                                              15 Kg (33 Lbs)
Computer Interfaces:                        RS-232 or USB

ASX Autosampler Specifications (ASX-260 or ASX-520)
ASX-260 Tray Size:                         10 Standards, 2 Sample Racks
ASX-520 Tray Size:                         10 Standards, 4 Sample Racks
EXR-8 Tray Size:                            10 Standards, 8 Sample Racks
5 Rack Sizes:                                  90 x 7 ml
                                                         60 x 14 ml
                                                         40 x 20 ml
                                                         24 x 20 ml
                                                         21 x 50 ml
Computer Interfaces:                       RS-232 or USB
Power Requirements:                     100-240 VAC +/- 10%, 50/60 Hz
ASX-520 dimensions (H x W x D):  61 x 52 x 48 cm (24" x 20.5" x 19") / Weight: 10.5 Kg (23 Lbs)
ASX-260 dimensions (H x W x D):  61 cm x 33 cm x 51 cm (24" x 13" x 20") / Weight: 8.4 Kg (18.5 Lbs)
QuickTrace M-8000 CVAA Mercury Analyzer